rcmp1.2-3
rcmp1-3rcmp1-2rcmp1.2-2PDB-WIRING

PDB XT60 5V 12V Power Board PCB

5 out of 5 based on 1 customer rating
(1 customer review)

£5.95

This handy PDB will supply 5V for your radio gear and flight controller, and 12V for your video camera, video transmitter with video through, connect up your ESC to your flight battery with an integrated XT60 connector.

Only 1 left in stock

SKU: RCMP1.2 Category:

Product Description

Same size as the NAZE32, F3 or CC3d flight controller.
A logical layout makes wiring up your drone a dream, no need for messy wiring.
With two Linear regulators for the 5V and 12V (no noisy switching uBEC).  An inherent design of the linear regulator is that they filter out noise especially on the 12V rail which some times can appear as lines on your video feed.

Specification:
Designed for 4S but will accept 3s
Weight 12g (including the XT60)
Size 36*36mm ( External Board Dimension)
Pitch 30.5*30.5mm ( Mounting hole centre to hole centre)
Mounting Hole Diameter   3mm

Package Contents:
1 x PDB 5V 12V Distribution Power Board
1x XT60 Socket

Additional Information

Weight 20 g
Dimensions 2 cm

1 review for PDB XT60 5V 12V Power Board PCB

  1. 5 out of 5

    :

    This PDB is an absolute jem. The foot print and pads are perfect with minimal wires needed. The XT60 provided also doesn’t protrude out to far.
    Video signal is also crisp and have had no need for a filter using 4 different VTX’s

Add a review